搜索结果: 1-15 共查到“机械工程 Treatment”相关记录22条 . 查询时间(0.125 秒)
With new heat treatment, 3D-printed metals can withstand extreme conditions（图）
热处理 3D打印 金属微观结构 燃气轮机 喷气发动机 叶片
2023/6/6
A new MIT-developed heat treatment transforms the microscopic structure of 3D-printed metals, making the materials stronger and more resilient in extreme thermal environments. The technique could make...
第25届国际热处理及表面工程联合会大会（The 25th Congress of International Federation forHeat Treatment and Surface Engineering）
热处理 表面工程 渗碳渗氮 感应热处理
2017/3/10
国际热处理与表面工程联合会（IFHTSE）于1971年成立于瑞士，其成员包括多国相关行业的科学和技术学会、协会团体和热处理及表面工程领域的著名跨国公司等，其核心职能是促进热处理及表面工程领域在科学、实践和工业应用的重要问题进行国际交流。国际热处理及表面工程联合会大会是国际热处理及表面工程联合会的系列会议之一，是国际热处理及表面工程领域水平最高的学术大会，至今已举行了23届，在国际上具有广泛的影响。...
Experimental testing of some types of biologically degradable materials for processing in the SBM mechanical plant for hydrothermal treatment
biomass stabilization thermal hydrolysis technological equipment biodegradable waste mechanical-biological treatment
2014/2/25
The SBM (stabiliser of biomass) mechanical plant model is designed for the hydrothermal treatment of biologically degradable materials with using the principle of thermal hydrolysis. The primary task ...
Influence of heat treatment on micro-structure of slurry aluminide coatings type TiAlSi obtained on TiAlCrNb alloy
Thin and thick coatings Aluminides Microstructural stability
2009/12/14
Purpose: Influence of heat treatment on microstructural changes in slurry TiAlSi coating deposited with 12.5% Si concentration on Ti48Al2Cr2Nb intermetallic alloy and investigation of the influence of...
Study of secondary recrystallization in grain-oriented steel treated under dynamical heat treatment conditions
abnormal grain growth Goss texture grain oriented electrical steel
2009/10/23
The present study was made to investigate secondary recrystallization in grain-oriented steels annealed at short time temperature exposures with application of dynamical heating. The investigated GO s...
The 4th Asian Conference on Heat Treatment and Surface Engineering
4th Asian Conference Heat Treatment Surface Engineering
2009/5/26
The 4th Asian Conference on Heat Treatment and Surface Engineering 27~30 Oct. 2009 · Beijing, China.Organizer is Chinese Heat Treatment Society,Topics include but not limited to:Phase Transformation, ...
Effect of heat treatment parameters on the properties of low-alloy cast steel with microadditions of vanadium
Low-alloy cast steel Microstructures Mechanical properties Heat treatment
2011/3/15
This article examines the effect of prolonged time of holding at the temperature of 6200C on the processes of secondary phase precipitation and mechanical properties of low-alloy cast steel with an ad...
Analysis of quality and cost of FeSiMg treatment master alloy vs cored wire in production of ductile cast iron
Ductile cast iron Vermicular cast iron PE Method
2011/3/15
The results of studies on the use of FeSi5%Mg magnesium alloy in modern cored wire injection method for production of nodular and vermicular graphite cast irons were described. The injection of Mg cor...
Selctive heat treatment of the gearbox component
Heat treatment Striker fork Ausferritic surface layer ADI
2011/3/15
Nowadays there are setting more and more demanding requests for the products of engineering industry from the points of the parameters of load, durability and reliability. They are followed by higher ...
Effect of heat treatment on re-solubility of potato proteins isolated from industrial potato fruit juice
potato proteins thermo-stability potato fruit water patatin protease inhibitors
2014/2/27
The contribution deals with thermal stability and re-solubility of potato tuber proteins isolated by ethanol precipitation from industrial potato fruit juice. The protein isolate was exposed to the te...
Computer programme for prediction steel parameters after heat treatment
Computational material science Artificial intelligence methods Neural networks
2010/2/9
Purpose: The purpose of this paper is presentation of the computer program for calculating the Continuous Cooling Transformation diagrams for constructional and engineering steels.
Design/methodology...
A novel approach to the design and optimisation of aluminium cast compo-nent heat treatment processes using advanced UMSA physical simulations
Heat treatment Castings Aluminium alloys Laboratory simulations
2010/2/9
Purpose: The goal of this publication is to present a new laboratory methodology for simulation of industrial melting, solidification and heat treatment using the patented Universal Metallurgical Simu...
Complex mathematical model and optimisation of vibration volumetric treatment for surfaces of machine parts
Mathematical modeling Vibration treatment Friable medium
2010/2/10
Purpose: The objective of this work is to develop the principles of the theoretical investigation of vibration volumetric treatment for the surfaces of articles manufactured by friable dry medium and ...
Processes of crystallization of alloys have decisive impact on structure of castings, and the same their utility characteristics. Knowledge about those processes constitutes a source of information to...
期刊信息
篇名
Changes of H+ pumps of tonoplast vesicle from wheat roots in vivo and in vitro under aluminum treatment and effect of calcium.
语种
英文
撰写或编译
作者
Zhang WH,Zhang FQ,Shen ZG and Liu YL.
第一作者单位
刊物名称
...