搜索结果: 1-5 共查到“电子技术 air”相关记录5条 . 查询时间(0.058 秒)
Stability Observations and Surface Analysis of Air Fired Nickel Thick Film Conductors
Air Fired Nickel Thick Film Conductors conductive paste ESL 2554 96% Al2O3 substrates
2010/12/23
The results from an investigation of the properties of air fired Nickel thick film produced with conductive paste ESL 2554 on 96% Al2O3 substrates are described. The analysis of the possible causes of...
The Influence of Air-Abrasive Trimming on the Current Noise of Thick Film Resistors
Air-Abrasive Trimming Thick Film Resistors
2010/12/23
In the work cited the authors investigated the influence of trimming on current noise, if
the resistors differ by the same scaling factor before and after trimming. These are the cases
in which the ...
Possibilities for Air Fireable Base Metal Conductors
thick conductive films air nickel chromium aluminum copper
2010/12/28
This paper discusses the status of thick conductive films formed by firing in air. The metals under study include nickel, chromium, aluminum and copper. The properties of the films are presented for f...
The Influence of Air-Abrasive Trimming on the Current Noise of Thick Film Resistors
Air-Abrasive Trimming the Current Noise of Thick Film Resistors thick film hybrid circuits
2010/12/28
The purpose of this study was to investigate the effect of some air abrasive trim cuts on the current noise of thick film resistors. It was found that the current noise changed on trimming the resisto...
An Air Firing Base Metal Resistor and Conductor System for Low Cost Thick Film Circuit Manufacture
An Air Firing Base Metal Resistor Conductor System Thick Film Circuit Manufacture
2011/1/5
A series of air-firing base metal resistor pastes which yield resistors with properties comparable to those of conventional precious metal thick film resistors has been developed. The pastes can be po...